Post by alihair on Jun 25, 2018 3:41:49 GMT -5
Pre-bonded Brazilian Virgin Hair, applied with a heat and glue method and often referred to as keratin glue extensions, are a fabulous way to add long-lasting length, fullness and highlights to natural hair. Pre-bonded extensions are made with 100% human hair and come in various textures and colors, and can last up to four months with proper care. With the right tools and time-tested application methods, Cheap Human Hair Weave，you'll be well on your way to a brand-new look.
1. Prepare your workspace by turning on your heating tool and placing the pre-bonded extensions on a flat surface within reach. If you want a more natural appearance on areas such as the sides and Peruvian Hair, you can snip 15 pieces of hair through the center of the glue base and set aside.
2. Separate the hair into sections. First, take a horseshoe-shaped section of hair on top of the head, encompassing the bangs and crown. Twist the hair and clip it out of the way with duckbill clips. Next, comb the sideburns forward and pin in front of the ears. Create a horizontal part about halfway between the crown section and the nape of the neck; clip the upper section out of the way.
3. Leave a 1/2-inch section of hair loose around the nape of the neck for a natural hairline. Above the loose hair, separate the first row of hair onto which you will apply the pre-bonded extension. Clip the rest of the hair out of the way with duckbill clips.
4. Select strands of hair in sections that are roughly equal to half the size of the glue tip. This is the hair to which the pre-bonded extension will be attached. Position the glue tip a 1/2 inch away from the scalp on the underside of the hair, grasping lightly with your thumb and forefinger.
5. Clamp the pincers of the heating tool against the glue tip and selected hair strands. You can hold the tool in place or open and close the clamp several times. Listen for the sizzling sound of the glue heating, as this is when you will remove the tool.
6. Release the top horseshoe-shaped section of hair and comb into place. Trim if needed to blend the hair with the extensions; style as desired.
AlipearlHair Website：https://www.alipearlhair.com
1. Prepare your workspace by turning on your heating tool and placing the pre-bonded extensions on a flat surface within reach. If you want a more natural appearance on areas such as the sides and Peruvian Hair, you can snip 15 pieces of hair through the center of the glue base and set aside.
2. Separate the hair into sections. First, take a horseshoe-shaped section of hair on top of the head, encompassing the bangs and crown. Twist the hair and clip it out of the way with duckbill clips. Next, comb the sideburns forward and pin in front of the ears. Create a horizontal part about halfway between the crown section and the nape of the neck; clip the upper section out of the way.
3. Leave a 1/2-inch section of hair loose around the nape of the neck for a natural hairline. Above the loose hair, separate the first row of hair onto which you will apply the pre-bonded extension. Clip the rest of the hair out of the way with duckbill clips.
4. Select strands of hair in sections that are roughly equal to half the size of the glue tip. This is the hair to which the pre-bonded extension will be attached. Position the glue tip a 1/2 inch away from the scalp on the underside of the hair, grasping lightly with your thumb and forefinger.
5. Clamp the pincers of the heating tool against the glue tip and selected hair strands. You can hold the tool in place or open and close the clamp several times. Listen for the sizzling sound of the glue heating, as this is when you will remove the tool.
6. Release the top horseshoe-shaped section of hair and comb into place. Trim if needed to blend the hair with the extensions; style as desired.
AlipearlHair Website：https://www.alipearlhair.com
